Work safety standardization certificate from the Ministry of Emergency Management of the People's Republic of China

CEC019-2019 "CEC Technical Specification for Certification of Environmentally Friendly Products Synthetic Material Sports Ground Layer

The reviewed sample made available complies with the limits of Pb,Hg,Cd,Cr(VI),PBB,PBDE,DEHP,BBP,DBP, DIBP as set by RoHS Directive(EU)2015/863 amending Annex ll to Directive2011/65/EU

In 2020 Zhejiang sports industry "champion brand said" activities, won the excellent sports brand (excellent brand) honourable title

Awarded as A-class contract-abiding and credit-keeping enterprise in Zhejiang Province.

After examination and approval, the conditions for membership are met and membership is granted.

Certification Mode: Type Inspection + Initial Factory Inspection + Post-certification Supervision

Self-environmental declaration in line with GB/T24021-2001idtISO14021:1999 "Environmental Management Environmental Labelling and Declaration Self-environmental Declaration (Type II Environmental Labelling)".

Applicable products (processes): Runway granules

Certified unit: reaction-curing one-component polyurethane waterproofing coatings
The above products meet the requirements of China Environmental Labelling Product Certification Implementation Rules ECC-1050EL-A/0, and are hereby issued.

Awarded by the Department of Science and Technology of Zhejiang Province, the Department of Finance of Zhejiang Province and the State Administration of Taxation of Zhejiang Province.

The following products have been validated by the China Athletics Association as meeting the requirements for special running tracks for national track and field competitions, and this certificate is hereby issued. 

RUNNING" water-permeable plastic running track

Rated as a level 3 enterprise for work safety standardisation

According to the work of China Association of Athletics Ground Equipment and Equipment Committee, after examination and approval of your unit for the China Association of Athletics Ground Equipment and Equipment Committee member units.

After the industry recommendation, network vote, expert committee review,  won the 2019 Top 10 Leading Brands of School Sports Ground Materials

Meet the requirements of CEC Environmental Friendly Product Certification Implementation Rules CEC-7001CVP-A/2, and are hereby certified.

Certification Mode: Initial Factory Inspection + Type Test + Post-certification Supervision

Meet the requirements of CEC Environmental Friendly Product Certification Implementation Rules CEC-7001CVP-A/2, and are hereby certified.

Certification Mode: Initial Factory Inspection + Type Test + Post-certification Supervision

The utility model discloses an assembly mould for plastic field construction, including an arc plate, a vertical plate and a chain plate; said arc plate is in the shape of an arc plate, and there are a number of arc plates, whose arc lengths are the same but whose arcs are unequal; said vertical plate is in the shape of a vertical plate, and there are a number of vertical plates, whose lengths are unequal; the arc plate and the vertical plate are provided with a buckled structure on the end, and said buckled structure includes a T-shaped groove and a buckle connecting member, wherein the height of the buckle connecting member should be smaller than the height of the arc plate, the vertical plate and the chain plate, and at the same time, the arc plate, the vertical plate and the chain plate are provided with T-shaped slots at the end. Connector, wherein the height of the fastening connector should be less than the height of the arc-shaped plate, the vertical plate and the chain plate, while the ends of the arc-shaped plate, the vertical plate and the chain plate are all provided with T-shaped slots; the practical new type of assembling moulds for the construction of the plastic field can be reused, and it can also greatly reduce the waste of the templates and save the time of prefabrication of the templates.

 The groove is set in a circular array; wherein the bottom of the buried part is fixed with a mounting flange, wherein the bottom of the mounting flange is flush with the bottom of the buried part; compared with the existing technology, the practical new type of hidden badminton net rack is completely horizontal with the ground when not in use, and can be quickly pulled out of the net column when in need of use, and then pull out the coiled net in one of the columns and fix it on the other net column. Badminton net rack can be put into use, convenient operation, and does not take up space.

This utility model relates to the field of plastic technology, and discloses a plastic production transfer device, including a transfer table, said transfer table has a console fixedly mounted on the front side of said transfer table, the interior of said transfer table is opened with a placing groove, and the interior of said placing groove is movably mounted with a hinge door. In this plastic production transfer device, a motor rotates to drive a turntable to rotate, and a transfer shaft rotates along with the turntable, and a plastic material arriving at the right side of the transfer table is lifted up by the rotating transfer shaft, and with the rotation of the turntable, the transfer shaft lifts up the plastic material in sequence, and when the transfer shaft passes through a pallet, the pallet is resisted by the transfer shaft and rotates to the right, and when the transfer shaft passes through the pallet, the pallet bounces back to the plastic material and to the bottom of the transfer shaft by a torsion spring, and the pallet is rotated back to the plastic material and to the bottom of the transfer shaft. When the transfer shaft passes the pallet, under the action of torsion spring, the pallet springs back to the bottom of the plastic material and the transfer shaft, and the pallet drags the plastic material, in the process, the transmission slide makes synchronous movement with the turntable along the guide rail, when passing the chiller, the chiller cools the plastic material on the top and bottom surfaces, which achieves the purpose of good cooling effect.

The utility model relates to the technical field of rubber production, and discloses a granulator for rubber production, including a shell, the top of said shell is fixedly mounted with an extrusion tube connected to the inside of the shell, the top of said extrusion tube is fixedly mounted with a feeding motor, the output shaft of said feeding motor is fixedly mounted with a transmission rod extending to the inside of the extrusion tube, the outside of said transmission rod is fixedly mounted with an extrusion sheet located inside the extrusion tube, the left side of said extrusion tube is fixedly mounted with a feeding tube connected to the inside of the extrusion tube, the inside of said shell is fixedly mounted with an isolation plate. sheet, said left side of said extrusion tube is fixedly mounted with a feeding tube connected to the interior of the extrusion tube, and an isolation plate is fixedly mounted on the interior of said shell. This rubber production granulator, when used, makes the raw material in the transmission process generated by the larger gap is reduced, to avoid the subsequent granulation raw material distribution is uneven, granulation efficiency is higher, in a large number of production can effectively save time, at the same time, the device structure is simple and reasonable, convenient for the maintenance of the maintenance of the later period, saves the maintenance of the later period of the maintenance cost.

The utility model relates to the technical field of rubber production, and discloses a granulator for rubber production, including a shell, the top of said shell is fixedly mounted with an extrusion tube connected to the inside of the shell, the top of said extrusion tube is fixedly mounted with a feeding motor, the output shaft of said feeding motor is fixedly mounted with a transmission rod extending to the inside of the extrusion tube, the outside of said transmission rod is fixedly mounted with an extrusion sheet located inside the extrusion tube, the left side of said extrusion tube is fixedly mounted with a feeding tube connected to the inside of the extrusion tube, the inside of said shell is fixedly mounted with an isolation plate. sheet, said left side of said extrusion tube is fixedly mounted with a feeding tube connected to the interior of the extrusion tube, and an isolation plate is fixedly mounted on the interior of said shell. This rubber production granulator, when used, makes the raw material in the transmission process generated by the larger gap is reduced, to avoid the subsequent granulation raw material distribution is uneven, granulation efficiency is higher, in a large number of production can effectively save time, at the same time, the device structure is simple and reasonable, convenient for the maintenance of the maintenance of the later period, saves the maintenance of the later period of the maintenance cost.

This utility model relates to the technical field of plastic production, and discloses an odour-cleaning device for plastic production, including a box, the bottom of said box is fixedly mounted with a stable base, and the interior of said box is fixedly mounted with an activated carbon filter plate. The plastics production odour-cleaning device, by setting up the processing box, in the plastics production project will be plastic processing raw materials and mixtures from the feed pipe into the mixing box, in the mixing box after the mixing reaction will produce gas, the gas will be extracted by the extractor fan into the processing box, the gas is sent to the processing box by the filter plate after the four layers of filtration to remove debris in the gas, the gas will come to the box body, after the activated charcoal filter plate filtration After the gas will come to the box, after the activated carbon filter plate will be dissolved in the water inside the box, effectively remove the odour gas produced in the plastic production, will be collected and processed, will not be spread in the air, to avoid the staff to long-term inhalation of such gases affecting the health, improve the safety of plastic production.

The utility model relates to the technical field of plastic production, and discloses a plastic production feeding chamber, including a foot, the number of said foot is two, and a support rod is fixedly mounted on the top of both said feet. The plastic production feeding room, in the use of the process, the material can be from the feed block into the feeding tank, through the provision of telescopic cylinders, connecting rods, solid rods and connectors, in the height of the feeding tank needs to be adjusted, telescopic cylinders can be activated, driving the connecting rod up or down, so that the feeding tank with the solid rod for height adjustment, the adjustment process is convenient and quick, can provide a better position for the staff, and in the feeding process, there is a three-phase asynchronous drive, and a three-phase asynchronous drive is installed. In the feeding process, there are three-phase asynchronous motor, linkage rod, bearings and baffle plate, the material in the feeding tank through the three-phase asynchronous motor start, drive the linkage rod rotation, so that the baffle plate to rotate, so as to control the size of the opening can be over the material can be very good control of the amount of material through the more convenient for the user to use.

The utility model discloses a high elasticity rubber preparation equipment, the structure of which includes wheels, base plate, support column, adjusting handwheel, transmission box, discharge pipe, emulsifying barrel, mixing rod, mixing rod easy to dismantle the device, the head, support auxiliary rod, LCD display, function buttons, the control box, the bottom of the transmission box and the top of the support column nested in, the discharge pipe nested in the bottom of the emulsifying barrel, the function buttons of the dismantling buttons of the control box by pushing the motor drives the active gear to rotate, which then drives the passive gear to rotate, so that the chain drives the follower gear to rotate to make the top rod to move to both sides. By pressing the disassembly button on the control box, the motor drives the active gear to rotate, and then drives the passive gear to rotate, which makes the chain drive the slave gear to rotate and make the top bar move to both sides, and at the same time, the electromagnet is electrically driven to pull the reply spring to drive the top block to move to both sides, which makes the rotating shaft lose the clamping effect of the top block and the top bar, and then the stirring rod can be disassembled from the bearings by pulling the stirring rod downward, so that the emulsifying stirring bar is easy to disassemble, and the emulsion barrel is easy to be disassembled. It is easy to dismantle the emulsifying stirring rod, and the speed of replacing the emulsifying stirring rod is high.

The utility model discloses a surface sand blasting equipment for plastic processing, comprising a shell, a regulator fixedly installed at a position near the top on the front outer surface of said shell, and two pressure gauges fixedly installed on one side of the regulator on the front outer surface of said shell, a dust switch fixedly installed on the other side of said pressure gauge on the front outer surface of said shell, and an activation switch fixedly installed on the other side of said dust switch on the front outer surface of said shell, and an observation window fixedly installed on the top of said detection door on the front outer surface of said detection door. start switch, said front outer surface of the shell is provided with a detection door near the middle position, and an observation window is fixedly mounted above the detection door on the front outer surface of the shell, and two groups of operation holes are fixedly mounted near the middle position on the front outer surface of said detection door. A surface sand blasting equipment for plastic processing described in this utility model is provided with a detection door and a fixing ring, which can be more convenient for the replacement of sand blasting gloves, and can facilitate the placement of a multifunctional plug, bringing better prospects for use.

This utility model has been initially examined by the Office in accordance with the Patent Law of the People's Republic of China, and the Office has decided to grant the patent right, issue this certificate and register it in the Patent Register. The patent right takes effect from the date of the announcement of the authorisation.

This utility model has been initially examined by the Office in accordance with the Patent Law of the People's Republic of China, and the Office has decided to grant the patent right, issue this certificate and register it in the Patent Register. The patent right takes effect from the date of the announcement of the authorisation.

This utility model has been initially examined by the Office in accordance with the Patent Law of the People's Republic of China, and the Office has decided to grant the patent right, issue this certificate and register it in the Patent Register. The patent right takes effect from the date of the announcement of the authorisation.

This utility model has been initially examined by the Office in accordance with the Patent Law of the People's Republic of China, and the Office has decided to grant the patent right, issue this certificate and register it in the Patent Register. The patent right takes effect from the date of the announcement of the authorisation.

This utility model has been initially examined by the Office in accordance with the Patent Law of the People's Republic of China, and the Office has decided to grant the patent right, issue this certificate and register it in the Patent Register. The patent right takes effect from the date of the announcement of the authorisation.

This utility model has been initially examined by the Office in accordance with the Patent Law of the People's Republic of China, and the Office has decided to grant the patent right, issue this certificate and register it in the Patent Register. The patent right takes effect from the date of the announcement of the authorisation.

This utility model has been initially examined by the Office in accordance with the Patent Law of the People's Republic of China, and the Office has decided to grant the patent right, issue this certificate and register it in the Patent Register. The patent right takes effect from the date of the announcement of the authorisation.

 There is a support foot fixedly installed; said mixing barrel is a split structure; this utility model has a simple structure and is convenient for mixing materials; when this utility model is used, plastic particles are poured into the top opening of the top structure, and the setting of a shelf board makes it possible for the operator to temporarily place the package containing the plastic particles on the shelf board when dumping the plastic particles, so that the process of dumping the materials is more convenient and less labour-intensive.

The utility model discloses a vulcanised rubber loading tooling, including a base frame, a horizontal moving component, a vertical moving component and a gripping component, the said base frame is equipped with a horizontal moving component sliding at the top of the base frame, the horizontal moving component is equipped with a vertical moving component at the top of the horizontal moving component, the vertical moving component is fixedly equipped with a gripping component; the said base frame includes a base, a base column, and a base slanting column, and the bases of the base column and the base slanting column are all welded and connected with a base. The base; the utility model of a plurality of grasping needle uniformly set in the base plate, drive the cylinder movement so that the base plate down, at this time the grasping needle can be inserted into the material and grasping, and then drive the cylinder action, the base plate upward, the grasping needle to drive the material upward; the rubber products have a certain degree of tightness, so the grasping needle into the rubber products inside the rubber products can be driven by the movement of the rubber products will not make the rubber products fall off.

 The scraper is located between the two side plates, and the top of the scraper is connected to the side plate by a rotating shaft; the middle of the scraper is hinged with the piston rod of the hydraulic cylinder, and the end of the hydraulic cylinder is hinged with the hydraulic cylinder seat, which is fixed to the side plate by bolts; when the utility model is in operation, the utility model is driven by the traction equipment, and the plastic material is poured into the left side of the conveying winch, and the plastic material located in the middle of the conveying winch is assigned to the ends of the conveying winch during the conveying winch's rotation; Then the plastic material is evenly spread on the ground by the pressure of the scraper, so that the finished plastic product is flat and dense.